What are the precautions for using the sealing machine ?

Publish Time: Author: Site Editor Visit: 82

1. It is not suitable for metal containers and metal caps, let alone press the start button on the metal table, otherwise the machine will be damaged.  

2. Before turning on the power, the induction aviation plug must be inserted and the screws must be tightened.  

3. Use a single-phase three-wire power cord. For the safety of the operator, a single-phase three-wire power socket must be used. The ground of the workplace must be dry to maintain insulation.  

4. Equipped with an automatic protection function for overheating. When the temperature inside the machine is overheated, the buzzer inside the machine will beep for a long time and the yellow indicator light of "Abnormal protection (PRO. MD.)" shall be on. At this time, the main power switch should be turned off and the machine will cool down in standby. After the buzzer stops, continue to work.  

5. During work, you should always touch the surface of the induction head to check whether it is overheated. If you find that your hand is hot, stop heating and wait for it to cool down before working (cooling does not need to turn off the power). When the "WARM UP" green indicator light is off, Do not press the start button to avoid false triggering. After the machine is finished, please turn off the power switch on the panel.  

6. Equipped with a 5A fuse, it cannot be replaced by a fuse greater than 5A.  

7. There is high voltage inside and the bottom plate is live. It is strictly forbidden to repair it privately to avoid personal electric shock.  

8. If you find any exposed wires before use, you should stop using the machine and wait for repairs before using it.  

9. The equipment should not be impacted, stressed or damp during transportation, storage and use.  

10. When the product is unpacked for inspection and acceptance, if it is found that the parts of the product do not match the packing list, you should contact the company in time under normal transportation and the packaging is intact.  

11. According to the instruction manual, the operation should be clearly understood in advance. If any product manufacturing quality problems are found, explain to the company within the specified time limit.

1. It is not suitable for metal containers and metal caps, let alone press the start button on the metal table, otherwise the machine will be damaged.  

2. Before turning on the power, the induction aviation plug must be inserted and the screws must be tightened.  

3. Use a single-phase three-wire power cord. For the safety of the operator, a single-phase three-wire power socket must be used. The ground of the workplace must be dry to maintain insulation.  

4. Equipped with an automatic protection function for overheating. When the temperature inside the machine is overheated, the buzzer inside the machine will beep for a long time and the yellow indicator light of "Abnormal protection (PRO. MD.)" shall be on. At this time, the main power switch should be turned off and the machine will cool down in standby. After the buzzer stops, continue to work.  

5. During work, you should always touch the surface of the induction head to check whether it is overheated. If you find that your hand is hot, stop heating and wait for it to cool down before working (cooling does not need to turn off the power). When the "WARM UP" green indicator light is off, Do not press the start button to avoid false triggering. After the machine is finished, please turn off the power switch on the panel.  

6. Equipped with a 5A fuse, it cannot be replaced by a fuse greater than 5A.  

7. There is high voltage inside and the bottom plate is live. It is strictly forbidden to repair it privately to avoid personal electric shock.  

8. If you find any exposed wires before use, you should stop using the machine and wait for repairs before using it.  

9. The equipment should not be impacted, stressed or damp during transportation, storage and use.  

10. When the product is unpacked for inspection and acceptance, if it is found that the parts of the product do not match the packing list, you should contact the company in time under normal transportation and the packaging is intact.  

11. According to the instruction manual, the operation should be clearly understood in advance. If any product manufacturing quality problems are found, explain to the company within the specified time limit.

The above are the precautions for the use of the sealing machine.

Company Profile

Wity Machinery Co., Ltd. since the year of 2000, Wity is coming to dedicate to Print Pack industry and bringing Wity Machines to all over the world. As a forerunner, with years of professional knowledge and experience, Wity machinery seek investment opportunities of new technology in Package Industry, and cooperate with partners in the world to build up business platform which benefits all.

E-mail:sales@witymachine.com
Tel:86-0577-66689802/86-0577-65536666/86-13676727550

> Hot Products